Questions & Answers for: GE socket error Computers & Internet

...error message displayed. I unplugged/replugged it several times hoping that would do something; no luck. Where do I start?? Thanks for any advise. If you fix the problem I'll send you some cookies! ...

error, however there are no auto or manual buttons on this oven to hit as instructed in the troubleshooting reply to correct the problem. Rosanne, he problem with your oven is the igniter. The igniter

...error displayed, I cannot use the owen at all. Any tips on how to fix it would be greatly appreciated. Thanks. I inserted the paper and cleaned the connectors with an eraser. However, i felt that ...

socket to remove these. Then remove the control panel (lift and rotate toward you). From here, you'll see the back side of the ERC. Look for the green "ribbon" coming from the keypad and inserted into

...socket.If you have to pull the oven, re-post and let me know... I'll walk you through it.There ya go! I replaced the sensor. Got the part from GE direct for about $59.00. As you indicated it was ot a ...

...error was with the motor not working correctly. I unplugged the machine for 3 mins and plugged it back up. It ran thru the initial diagnostics again and said there was no problem. It then completed ...

...a sensor error! I can stop it, but it starts again shortly after! 1.tighten nut at sensor socket 2.check connections to socket 3.does error go away when sensor is used,if so probably bad ...

...error when I incert into camera Try another card to rule out a defective card. If it persists with a new card, odds are a pin is bent or broke inside the socket and the camera will need to go in for ...

...up with a computer error make sure your graphics card is securely seated with no dust built up or in the socket if i have misunderstood or you need more help with this post a reply hope this helps ...

...error code. Just a Msg that there is a keypad short. Was made Aug 2009. Purchased Jan 2010. Depending on part availability I would recommend the replacement of the keypad "membrane often shorts" ...