Questions & Answers for: Brother socket error Computers & Internet

...sound and says sending error on the Lcd, kindly advise the likely reasons as to why this is happeining, is your printer plugged into a power strip? if so, plug it into wall socket..this MAY

Socket Error: 11001, Error Number: 0x800CCC0D As seen above this is what is says after I try to scan Image to send to and e-mail as an attachment. Scanner Working fine. Its just not sending. What Do I

...socket and then into the printer and re-insert the cartridges and wait and see if the error comes up. if it still does then I hope you are not using refilled cartridges If you are then your printer ...

error poor line connection check the cable has been put into the corect connector on the back it has to be put in the socket marked line.. if you have it in the other one for tel the fax cant hook up.

...socket). There may be a problem with the way the Brother machine is connected or you may have a bad telephone line. Try resending again. If the transmission is successful, the problem was created by ...

...error messages no response/busy I keep getting this message and know the other party is available. I checked mode (fax) and telephone connections and wires. Anything else I should check? have you ...

...socket). Try resending again. If the transmission is successful, the problem was created by the connection of the Brother machine and the other devices on the line. Reconnect the other pieces of ...

...answer the incoming call? If so does it give an error code? Are you using the genuine brother line lead? Finally make sure the line lead is plugged into the "line" socket and not the "tel"

...error on the telephone line connected to your MFC. Either the line is noisy, not connected or perhaps connected via a PABX or a VOIP modem or similar? so it will not work. Try plugging a standard ...

...socket...or both. THE link below will take you right to the page in the manual that explains the error. I hope the tape works for ...