Question about LaserJet 4L Printer
...printer seems dead! Is it? A thunderstorm just caused momentary loss of power. My pc and other things on a surge protector are fine, but my HP 4L Laser printer seems to be dead - no power. Can it be ...
Question about X8350 All-In-One InkJet Printer
Printer dead, no lights, not powering up at all The printer is completely dead. No lights, no sign of power. The only sound from it is a steady clicking when the power source is connected. The outlet ...
my hp laserjet 6p is printing blank pages- I suspect that the laser is dead I would think the fuser is dead. They make repair kits The 6p was a really nice printer.
Printer dead. The company electrian has just safety tested my printer, AOK. After attaching the leads there is no power supply although the leads test AOK. The printer is dead, it has minimal use and ...
Question about STYLUS CX3900 All-In-One InkJet Printer
...power supply. Plugged in?, Local breaker at socket? Test meter the power plug that goes to printer. Still dead? Use as door stop. If new purchase, and still dead, take back for exchange or
Question about Stylus DX6050 All-In-One InkJet Printer
there seems to be no power to my printer it is just dead have checked all connections theres a battery inside replace double check fuse if battery is dead im sure that is.
MX700 Printer all-in-one will not power on. The power supply brick may be dead. If you can test this with a voltmeter and see accurate power, then I would say the Formatter Board is dead.
Question about Photosmart C5180 All-In-One InkJet Printer
...Is there any internal fusible to replace? or the printer is fully dead? thanks Carlos Most likely dead. Also FYI 99.9% of inkjet printers are not economical to repair. Just replace
Question about Photosmart C5180 All-In-One InkJet Printer
epson me 340 printer dead no lights nothing please help what to do if my printer epson me 340 shows no light and its dead
Question about OfficeJet J4580 All-In-One InkJet Printer
...printer was dead and I found that the adapter did not supply 32 VDC anymore. I replaced the power adapter with a new one but the printer is still dead. Check the outlet, it could be that the outlet ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,161 Questions
2,149 Questions
1,912 Questions