...setup-> press ok/Enter->Scroll Down to Error Correction mode(ECM) and highlight -> press ok/Enter->Select turn OFF-> press ok/Enter.At Last Press Cancel to quit the menu. Decrease the Fax speed.Steps ...
...I succeeded by: a) changing the Error Correction Mode (ECM) to OFF b) disabeling V.34 option steps for a) Fax setup -- All faxes -- Error correction -- OFF b) Fax setup -- All faxes -- V.34 -- ...
...setup. Use the right arrow and select Error Correction Mode. Press ok and select Off.) *Try sending at a lower transmission speed. (To lower the transmission speed. Press the setup button, go to ...
...problem here - I got it work: - Error Correction: off - V34: off (both Menu -> Fax-Setup - All Faxes) - detect-dial-tone: off (Menu -> Fax Setup - Fax Send setup - detect dial tone) :-) ...
Setup displays. Press OK . Press the Down arrow until Error Correction Mode displays. Press OK . Press the Right arrow > until either OFF or ON displays. Press OK . Send another fax to verify that the
...error. have you adjusted the page setup on your software? I'm assuming you're using Word to print a mail merge. yes? Check that the margins are setup properly in the "word document" Go undetr file, ...
Question about OfficeJet 7410 All-In-One InkJet Printer
...setup fax, and make sure the option to "Junk" fax blocker is off. The default when you setup the machine itself is on yes. This helped me with my "error 410" message I received when printing fax
Question about LaserJet 3050 All-In-One Printer
...232 Try this... a) changing the Error Correction Mode (ECM) to OFF b) disabeling V.34 option steps for a) Fax setup -- All faxes -- Error correction -- OFF b) Fax setup -- All faxes -- V.34 -- ...
...Setup. A network cable/connection is not present. Network Boot is in the boot order before a present boot device. To resolve this error, remove Boot to LAN from the list of boot devices in BIOS
Question about LaserJet M4345 MultiFunction Printer
...error, check the surface sensor of the paper tray2 in the Manual Sensor Test 2 menu under the Troubleshooting menu. Connect back the cassette lifter motor and the DC controller PCA's connectors and ...
Usually answered in minutes!
5,067 Questions
2,066 Questions
1,757 Questions
1,195 Questions
1,096 Questions
