Questions & Answers for: error c26

C26 indicates Peak Detection Error. U need to check whether the lamp light on when u ON the machine. If no, u need to check the inverter cable, inverter board, or exposure lamp. If light is ON, then u

...C26 code is a peak detection error on your scanner. You'll have to turn off the copier, remove the glass and CAREFULLY clean the mirrors and exposure lamp on the scanner. That usually takes care of ...

...c26 error on copier toshiba e650 C26 is a peak detection error (when the copier scans the white reference plate there is an error in the detection) The most common cause of C26 error is the failure ...

...toshiba copier e 810 C26 indicates Peak detection error. U need to make sure the exposure lamp is light when u switch ON machine. If no light, then u need to check the inverter and the exposure

...error code c26 on my toshiba e-studio 550 copier? Hi how are you i hope you are well this is jack ..my personal ID.. (jack_pak@hotmail.com) C26 Error is scanner error please check the scanner unite 1 ...

...the exposure lamp light? (Perform the output check in the test mode: 03-267) If no, Replace the SLG board-->inverter-->exposure lamp. strip is ok and lamp light is on but still c26 error ...

e 207 errors c27 It might be C97 or C26 Clean drum unit and transfer charger. For C26 check scanner cable.

...error c26. how can i fix it fixing error code c26 for toshiba e studio 212 it is cis unit error check connection between cis unit and main board otherwise replace cis unit ribbon OR cis unit OR main ...

...C26 .For C44 the error clearance is "switch on the copier while pressing 0&8 AD will appear enter 400 and press start (print) button and enter "0" and press Interrupt button , switch off and on ...

C26+error Toshiba e-Studio 18 - C26 - Printcopy.info https://printcopy.info > model=e-Studio 18 > code=C26 Code: C26; Description: Peak detection error: Lighting of the exposure lamp (white reference)