Audio Players & Recorders - Recent Questions, Troubleshooting & Support

It looks like the manual knows, and you can have 5 AM station presets and 15 FM. https://www.google.com/search?q=preset+a+second+AM+station+on+a+Sony+SRF-M97+Walkman ..

Clean Your Turntable with a microfibre cloth. Power off the turntable and unplug it for safety. Access the turntable's platter by lifting it off. Inspect the belt. If it's loose or damaged, consider replacing it. Amazon should have the belt replacements. If Your Record Player Spins Too Slow, Here's How to Fix It in 3 Steps - All For Turntables

ok va bene

All questions need clear 'make model (what it is)' first 3 words. https://www.google.com/search?q=fmdott085+V398 ..

"Opening" ... Please explain what you mean.

The HDD will spin up and may stay on for as long as the computer is connected depending on how the computer bios is set up. I set mine to switch off 10 minutes after no activity. That gives the HDD time to write to it and check itself.

Question edited for clarity, typo and CAPS. Question moved from Cars and Trucks category. Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries. How long is the warranty on AfterShokz? While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase. Jan 11, 2019

How To File A Warranty Claim For Your SHOKZ Headphones

https://www.google.com/search?q=Openfit+Shokz+battery+replacement ..

It is for several reasons might be power supply,may be internal components or malfuctioning of power button,so you Can fix it by connections,call technicians and replacing damaged ones

Please you have to power on your mixer and then connect and pair,so it will connect

Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first. But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.

Question edited for clarity and add maker. Unfortunately it is not listed anywhere, but it you look at the fuse, they are usually marked on the end. https://www.google.com/search?q=Genesis+G608+5.1+replacement+fuse ..

There is no support for this unit. https://www.google.com/search?q=Timex+t115S Open it up and look what powers the LED Light. ..

Yes if it has a suitable speaker connection available and is nominally 8 ohms impedance Speaker and AV.

Hi, I hope this helps,Pins look like this: (Top view, not copper side)1 2 3 4 56 7 8 91 = Thin white wire from thick white cable (Left input)2 = Gray (Speaker out)3 = Orange (+V return from volume unit to bass unit)4 = Not connected5 = Thin Red wire from thick red wire (Right input)6 = Blue (+V power from bass unit to volume unit)7 = Black (GND - if socket removed, solder 3 socket shield holes to each other or solder black wire directly leftmost hole)8 = Not connected9 = Shield copper from thick red wireShield copper from thick wire : Solder to GND or Left unconnected

check the connection inside the radio, switch of AC-DC connector maybe loose contact.( leak diode more probability replace it)

Question edited for clarity. Question moved from 'Dual Televisions'. 'make model (what it is)', first 3 words in all questions please' Nothing on L3 except for the Toshiba Copier. Try Toshiba Support direct. https://www.google.com/search?q=Toshiba+Dual+Media+Player.+Error+code+L3 ..