Questions & Answers for: power cut damage sony home

...Sony Home Theatre system, it plays fine until it gets to about the 6th track, when it gets stuck. You can hear it trying to read/play the disk, but it can't. It won't play any subsequent tracks. I ...

power sony dz 750k service manual go to this linkhttp://www.eserviceinfo.com/download.php?fileid=64999Checksum: ad16cb64d84d05d13e18bafeabb4fdf overload or push power protector problem due to 9V power

...Sony Home Theatre System (with 1 HDMI ) and Sony TV with only components output, Satellite receiver is without HDMI facility. kindly guide me how to connect satellite receiver to home theatre + TV ...

...power...and i dont know how to fix it... remove all speakers and turn it on if it still displays protect (and it probably will) the damage is done. could need a diode or an output ic. not a diy

i have sony DVD Home Theatre System, it showing the message on screen as " push power protector" Audio amplifier IC´s damaged need to replace them

...Sony BDV T57 Home Theatre System is connected and powered up when the Polaroid FLM-2632 powers up. To activate its digital audio out ???? The note part about only being available only under HDTV ...

...cut out. It's probably your fan. The system runs hot, as it supplies a lot of power to push your speakers. The system knows that without a fan, it will overheat. If the fan gets hot, the system will ...

...sony Home Theatre Model: DAV-DZ910W flashes push power protect any help to fix this error Sounds like a PSU problem, or your electric wall isn't stable. Dear sir , How to fix my home theatre system ...

...Power Protector error? I have measured voltage from the two 31.5V dc outputs to the Amplifier Board as reading 9V. Output voltages from connector cn906 as close to stated values, but not exact. There ...

...Sony mhc zx70dvd system is on what not working display showing push power protector I'm checking all speakers cable every thing is fine so please give me solution Please confirm that all the speakers ...