Questions & Answers for: Singer do while loop statement Computers & Internet

...Turn the hand wheel until the needle rises back up to it's highest position. Gen You will see a loop of thread wrapped around the upper thread. Open the loop and find the free end of the bobbin ...

missing wire loop & screw to hold sewing machine pressure foot Does anyone know about the little wire loop with a tiny screw that is used to hold a foot in place in a sewing machine? Without this ...

I can't get the thread and bobbin to make a loop to start my sewing. karbell01@aol.com it sound like the timming is off, if your machine won't make a loop at all it has to be serviced now if it makes ...

Thread loops underneath thread loops on bottom--looping thread could be caused by 2 things 1.check the needle see if it's bent or blunt--lay needle on flat surface & roll the needle over---if ...

I think the bobbin tension is off - I have large thread loops on the underside of the fabric when I sew It sounds crazy but if you have loops on the underside of your fabric it means your upper thread

My needles hits the lower loop on my 16sh644 serger and the thread from my needles won't stay wrapped around the lower loop lever I have changed out both needles, the lower loop after it broke and

singer 2263 loops on top of fabric My thread is looping on the top when my tension is on 4. If I put tension on 1 or almost 0, then it won't loop so bad. Any ideas? try changing the ...

bottom thread is looping on top of fabric on my Singer Futura 400 machine Bobbin thread is looping on top of fabric, even though tension is set at S Thread looping can also be caused by the use of ...

...spike, or whatever it is on your machine, which is under the needle, must pass through the loop in the thread from the needle at exactly the right time. When the needle reaches it's lowest ...

Singer 328K is jamming. this is a used machine, new to me. seems old but solid. was working well, then bobbin thread started looping. i have played with the tension. still loops. now the hand wheel ...