Questions & Answers for: Subaru code of conduct Computers & Internet

do subaru codes come on because of other codes? like is code 66 on because code 23 is on? Yes 1 code can make another code come up. This is due to say a injector not working properly will make the ...

I have a subaru legacy 1995 estate, it's the boxer twin turbo and I can't get the reversing lights to work that are on the tailgate. I have checked the fuse (wording on the box all in *** but I have a

...Be More Spacific as to Your Problem If the CEL light is coming ON.This indicates that there are codes stored in the vehicles ECU(the computer memory of car). Instead of replacing parts its ...

I keep hearing that I need to find and pull fuse 14 on my 96 subaru legacy 2.2L to try and reset the AT Oil Temp light that is flashing at start-up. The lid is missing, so I have no idea where this ...

...bearing which I replaced. How do you reset the ABS light. Here is the procedure for clearing ABS codes, the connector is up under the drivers side dash, it may be taped to another harness so just ...

...code p0171.Any help? I hope this info helps! DTC P0172 - SYSTEM TOO RICH (BANK 1) DTC DETECTING CONDITION: Two consecutive driving cycles with fault TROUBLE SYMPTOM: Erroneous idling Engine stalls. ...

my 1993 subaru was starting ok but the ground wire came loose,iput it back on and it started then when i tried to start it again it only clicks but wont start the ground wire from the battery ...

loud chatter on start and rattle from timing chain area had car for almost 3 months with no problems now it makes grinding/chattering noise The timing chain area also takes in the alternator and water

code p1540 I have error codes P0500, P1101, P1121, and P1540. will any of these cause engine to stall out? What exactly is a Vehicle Speed Sensor Malfunction 2? Google your codes & read up on the ...

check code engine light Code comes up 65, 66,,67... What could be the problem? The code should read a letter and 4 numbers after it. Try the codes again and see if you don't come up with a code like ...