My LG Intello dishwasher stops washing and gives me a error code "TE"
Please help
I had the tE error code on my dishwasher LDF7811ST and noticed that with the door half open the error would not appear. I faked the door being closed (pushed in the top latch (can be unlocked by pulling out with a paperclip after the test) after which the washer worked fine: suspected the wiring harness. Removed the stainless steel front and discovered quickly that 1 wire was cut (might have made contact with the door half open), 2 wires to the point where the insulation was gone and the bare conductor exposed (!)and 2 more were about to to be cut completely! I soldered and shrink wrapped the wires and the problem was gone. Made some pictures for evidence and plan to contact LG as this is a fire hazard!
Alexander
The MOSt common reason for a "tE" error code is the temperature of the hot water from the hot water heater is greater thant 145 degrees (F)
Adjust your hot water heater down and measure the temp at the kictchen tap.
Good Luck!
816 views
Usually answered in minutes!
model LD 2050SH
the te is supposed to mean to replace the thermister, which was done by the repairman but it still does not work.
tE and no longer works, what did you do to get the machine fixed.
×