What is the code for sharp TV's for this remote control

SOURCE: Sharp TV (LC52D64U) remote control Comcast cable (DVR) box ?

I just bought a new Sharp Aquos and reprogrammed my Comcast remote to accept Sharps code number 0093. Here's a link to the procedure: http://www.comcast.com/MediaLibrary/1/2/CM/VanityURL/documents/comcast_dvr_remote_manual.pdf

SOURCE: universal remote

need a code for a philips remote to control a zenith tz

SOURCE: Universal Remote control code on Sharp 13H-M60

http://www.remotecodelist.com/remotes/magnavox/Philips-Magnavox_PM525S.pdf
This is the user's manual for a Phillips remote control. There is a list of codes in it. They should be rather universal. There's also instructions as to how to program it. I believe that there is a way to program it without using the codes.

Programming with Code Search

1. Manually turn on the device (TV, VCR, etc.) to be controlled.

2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.

3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.

4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.

Hope this helps :)

SOURCE: I need programming instructions for Jensen Remote

Here you go...it took a while but I found the user manual cause I ROCK....that's right say it with me....He...Rocks...hehe...but anyway here is the link address if the link doesn't work...
http://safemanuals.com/user-guide-instructions-owner-manual/JENSEN/JER-321-_E

I hope this helps...good luck and thanks for rating my effort....the Fang

Download the completeuser guide (3257 Ko)