Washing Machines - Recent Questions, Troubleshooting & Support

There's a PDF with the diagnostics codes here:


Or reach out to these folks to see if the repair manual includes the schematics:

Maytag Washing... | Answered 7 hours ago

my washing maction have a priblem E7 err

Washing Machines | Answered 16 hours ago

Toshiba top washer machine with error code e7-4. What the problem and how to solve.

Washing Machines | Answered 16 hours ago

Its possible but difficult. You will need to drill a small hole down the middle of the snapped off bolt and use a correct size "easyout" which is a special reverse threaded stud which goes into the hole and unscrews the snapped off bolt.

Simpson Washing... | Answered 19 hours ago

Looking for this answer too. Judging by your question's age my search might as well be for Atlantis. Anywho, in the first link below a user claims the capacity to be 16 gallons for standard (large) and 19 gallons for extra. I put this into Google and got 2.14 cf for 16 gal and 2.5 cf for 19 gal.



May the Force be with you.

Now for some words for Google to find:
Maytag A212 Capacity CF Cubic Feet Gallons Size Matt Damon

Washing Machines | Answered 19 hours ago

Its possible, the water valve will be energised to allow water to come in. The only way to confirm is to pull the fridge out and see if the noise is coming from where the water hose would normally be connected.

Frigidaire... | Answered Yesterday

Check the pyrolytic sensor at the top of the oven. Our oven went haywire a few years ago and the Tech pulled it out and cleaned it. It was covered in baked on grease etc. We had a lot of trouble using pyrolytic. The door lock wouldn't release once. That had to be replaced to fix the oven.

Miele Washing... | Answered Yesterday

if motor ok check agitator cogs under plate of agitator

Hoover Washing... | Answered Yesterday

see if belt under unit bad or agitator cogs under agitator first see if pump and hose ok

Electrolux... | Answered Yesterday

remove agitator and see if cogs are bad or plastic plate with screws gears under are probably bad

Electrolux... | Answered Yesterday

Not finding what you are looking for?
Washing Machines Logo

258,212 questions posted

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers


Level 3 Expert

85206 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides